EVO3 QM has been engineered to help you increasing your dragster reliability and overall performance. After the great success of MyChron3 660, AIM introduces this Quarter Mile data logger as the evolution of one of the world's most successful data acquisition systems: EVO3. High performance, with plenty of channels and the easiest connection to the most important ECUs on the market, based on eighth mile and quarter mile competitions, EVO3 QM has been specifically designed and developed for Drag Races. EVO3 QM starts with a manual switch following NHRA rules and stores runs and not laps. It can log RPM, up to 4 speed inputs, up to 12 analogue inputs and a lot of additional channels using an ECU interface (via CAN bus or RS232). EVO3 QM configuration is easily performed through DragOn, the software properly developed by AIM to configure this logger. All data are stored in the 8 MB flash internal memory and can be downloaded to a PC through USB connection (using both the USB cable or the optional DataKey). AIM QMAn powerful software lets you create your personal ET database and analyze performance data. A fully expandable system EVO3 QM can be interfaced (via proprietary CAN bus) with up to 12 AIM LCU-ONE as well as with AIM DaVid.

EVO3 QM connects to any kind of sensor: engine rpm, clutch rpm, driveshaft rpm as well as speed sensors, k-thermocouples, thermo resistors, pressure transducers for oil, water and brake, potentiometers, accelerometers and gyrometers. This great flexibility results in a formidable support for racers at all levels, from amateurs to professionals Software The whole dragster software suite (DragOn and QMAn) is included free of charge in EVO3 QM kit. They allow you to configure the system and to analyze yours and you dragster performances in a lot of different ways, thanks to different data visualizations, graphs, histograms and comparisons between runs. All AIM software work under Windows XP, ME, 2000, 98 SE.

Available versions EVO3 QM is available in two different versions: EVO3 QM Pista helps to analyse and optimize both dragster and racer's performances. Thanks to its 8 MB internal memory, 8 configurable channels, sensors included in the kit, EVO3 Pista is a truly complete data logger. For demanding pro drivers, looking for more channels and top performance, EVO3 QM Pro is equipped with 8 MB internal memory, Deutsch connectors, 4 speed channels, 12 configurable channels and additional sensors included in the kit.

Technical characteristics Internal bi-axial accelerometer -5g / +5g Sampling frequency: 5 kHz 1 digital RPM channel From 8 to 12 configurable analogue channels (temperatures, pressures, potentiometers, Lambda, 'on-board' and custom sensors), depending on the version Up to 4 speed channels depending on the version 8 MB non-volatile internal memory DragOn, QMAn software USB cable 8-16 V external power Up to 60.000 RPM with configurable RPM scaling

Features System dimensions: 100 x 71 x 38 mm Weight: 400 g Waterproof IP65