|
|
 |
MXL
QM has been
engineered to help
you increasing your
dragster reliability
and overall performance.
After the great success
of MyChron3 660, AIM
makes a step forward.
The new MXL
QM, in fact,
is a tool designed
and developed for
drag racers (as QM
for quarter mile tells
us) but with the potentials
of a high tech logger
as MXL,
one of the world most
successful data acquisition
system, is.
High performance digital
dash with plenty of
channels and the easiest
connection to the
most important ECUs
on the market, based
on eighth mile and
quarter mile competition,
MXL
QM is specifically
designed for Drag
Races.
MXL QM starts
with a manual switch
- following NHRA rules
- and stores runs
and not laps.
|
|
|
|
It
samples RPM, up to 4 speed
inputs, up to 12 analogue
channels and additional channels
through ECU interface (via
CAN bus or RS232).
Moreover it can be easily
configured using the dedicated
DragOn
software.
MXL QM can be interfaced
(via proprietary CAN bus)
with virtually infinite LCU-ONE
as well as with DaVid.
All data are stored in the
8 MB internal memory and can
be downloaded to a PC through
USB connection (using both
the USB cable or the optional
DataKey).
QMAn,
the powerful software properly
developed by AIM for this
logger, lets you create your
personal ET database and analyse
performance data.
|
|
|
|
 |
Data
of an entire racing week-end
can be reviewed directly on
the wide backlighted display,
for immediate evaluation of
the most important measures.
There is virtually no limit
to the number of sensors you
can connect to MXL
QM: engine rpm, clutch
rpm, driveshaft rpm, speed
sensors, k-thermocouples,
thermo resistors, pressure
transducers for oil, water
and brake, potentiometers,
accelerometers, gyrometers.
|
|
|
|
|
| Technical
characteristics |
|
 |
RPM graphical
and numerical view |
|
|
Configurable RPM scaling
(from 4.000 to 22.000) |
|
|
Gear number: calculated
or sampled from "on-board"
sensor |
|
|
10 shift lights: Green -
Yellow - Red |
|
|
6 freely configurable max/min
alarm lights |
|
|
Internal data acquisition
system with 8 MB non volatile
memory |
|
|
Up to 2 kHz sampling frequency
(200 Hz for each channel)
|
|
|
Up to 4 speed inputs |
|
|
Up to 12 analogue channels |
|
|
Additional channels through
ECU interface (via CAN bus
or RS232) |
|
|
Proprietary AIM CAN bus
interface with virtually infinite
LCU-ONE lambda controllers
and/or DaVid Video Recording
System |
|
|
Free DragOn and QMAn software
to easily configure the gauge
and analyse acquired data
|
|
|
| Features |
|
|
System dimensions:
174 x 110 mm |
|
|
Display dimensions : 140
x 67 mm |
|
|
Waterproof IP65 |
|
|
|
|
|
|
